Special features. Special R&D Purpose machine with standard “B”, BB”, or D” Tooling. Turret made of SG iron with Electro Less Nichol Plating process & fitted with wiper seal. Three piece Turret with keyway to suites any shaped Tablet Punches. Outside controls for quick setting of Tablet thickness & Weight adjustment. Gravity feeding system for Easy charging of granules & minimum wastage of material. Double Compression Mechanism for Double Layer Tablet. Upper guard interlocking for operator’s safety. Turret Speed can be change by A.C frequency drive. Central drive Mechanism. All critical parts made in CNC machines. Totally enclosed. GMP model Dust Suction Nozzle arrangement. The tablet output depends upon the following factors. The physical and chemical properties of material to be compressed. The tablet shape, weight and its thickness. Ambient Conditions. * Actual Output is normally 80 % of this value. Note: Electric voltage & frequency can be provided as per customer’s requirement to specify while placing an order. The rights for the modification in design & spaces are reserved without prior notice.


Technical Specifications

MODEL ‘B’ TOOLING D’ TOOLING B’ + ‘D’
TOOLING
B’+BB’+D’
TOOLING
No. Of Station 11 9 5+5=10

3+3+3=9

Material Feeding system Gravity Type Gravity Type Gravity Type

Gravity Type

Max. Compression Load 1st Layer (Tons) 20 kN / 2 Tons 20 kN / 2 Tons 20 kN / 2 Tons

20 kN / 2 Tons

Max. Compression Load
2nd Layer (Tons)
40.5 kN / 4.5
Ton
40.5 kN / 4.5
Ton
40.5 kN / 4.5
Ton

40.5 kN / 4.5 Ton

Max. Tablets Dia. (mm) 15 23 23
For “D” Tooling
15
For “B” Tooling

23
For “D” Tooling
15
For “B” Tooling
11 For BB’ Tooling

Max. Depth Of Fill 1st Layer(mm) 20 20 20

20

Max. Depth Of Fill
1st Layer(mm)
8.5 8.5 8.5

8.5

Pneumatic Ejection For Sample
weight check
For Sample
weight check
For Sample
weight check
For Sample weight
check
Turret Speed (rpm) 3
to 34
3
to 34
3
to 34
3
to 34
Output Tablets/ Hour
[max]*
22440 18360 10200 6120
Output Tablets/ Hour
[min]*
1980 1620 400 540
Both Hopper Capacity 1.5 +1.5 kg 1.5 +1.5 kg 1.5 +1.5 kg 1.5 +1.5 kg
Air Pressure only for
Pneumatic ejection
model
4 Bar 4 Bar 4 Bar 4 Bar
Main Electric Motor
(Driven through ACVF)
2 HP, 1440
RPM, 3 Phase
2 HP, 1440
RPM, 3 Phase
2 HP, 1440 RPM,
3 Phase
2 HP, 1440 RPM, 3
Phase
Electric Supply Single Phase /
Three phase
Single Phase /
Three phase
Single Phase /
Three phase
Single Phase /
Three phase

PACKING SPECIFICATION

PARAMETER SPECIFICATION
Machine Dimensions L x W x H (mm) 672 x 45 5 x 10 50
Approx. Net Weight (kg.) 390 kg
Case Size L x W x H (mm) 1143 x 94 0x 1170
Approx. Gross Weight (kg.) 576 kg
Outer Case Size L x W x H (mm) 1268 x 1040 x 1300

Lab Press with Mighty Features: The speed of the turret is adjustable through AC variable drive. Force Feeder. Pre Compression. Excellent accessibility for quick cleaning and product conversion. Center pillar drive Mechanism with powerful Gear Box. Design ensuring the highest standard of G.M.P. Operator Safety – Interlocking on Upper & Lower Guard. Turret Electrode less Nichol Plated (ELNP). Lower punch seals. Hard heat-treated Presser Rollers. Out side controls for Pre compression Adjustment, Tablet thickness adjustment and indicator for Tablet thickness control system. Low noise level. Easy movability. Electrical voltage & frequency can be provided as per customers requirements. Table trolley stainless steel with storage cabinet for dies & punches.

Technical Specifications

No Of Station 3 st/ 6 st/ 8 st. 10 st. / 12 st.

Multi Tooling

12 st – (4+4+4 / 6+6)

Tooling ‘D & B’ ‘B’ D,B and BB / D & B
Tab. Dia Max. 23/16 MM 16 MM 23/15/11 MM
Tab Thickness 6 MM 6 MM 6 MM
Tab. Out put Max./Hr. 5760 / 11520 / 15360 19200 / 23040 23040 max.
Depth Of Fill 20 MM / 16 MM 17 MM 20 MM
Primery Compr. Max. 2 Ton / 20 KN 2 Ton/ 20 KN 2 Ton / 20 KN.
Pre.Compression Max. 8 Tons / 80KN 8 Tons / 80 KN 8 Tons / 80 KN
Turret Speed 12 rpm min / 32 rpm max.
Main Motor 2 HP /1440 RPM / 1 phase/3 phase/ 50/60 Hz Motor.
Feeder Motor 1/8 HP/ 75 RPM/220 VAC. 50/60 Hz.
All over dimension 813 mm [D] x 584 mm [W] x 1266 mm [H]
Net weight 425 Kg. Approx.
Gross Weight 490 kg. Approx.
Case Dimensions 838mm (33”)[D] x 635mm (25”)[W] x 1250mm(49”)[H]

Lab Press LP- II PLC based is a High Tech Rotary Tablet Press in table-top design for R & D and small batch production. This Single sided R & D Tablet Press fully conforms to GMP and the safety requirements. All Electrical settings can be performed by Front panel with indicators at the front of the machine. The machine is equipped with pre pressing and main pressing systems. The compression force can be adjusted up to 6 tons. A rotary force feeder with adjustable speed as well as a pre-compression station using rollers (2 tons) are included as standard. The turret is driven by center shaft drive mechanism by a motor and Powerful Reduction gear box. The turret speed is adjusted by A.C. (inverter) frequency drive.The drive is provided by an inbuilt three-phase motor with A.C Frequency Drive (inverter). The cleaning easy to dismantle and operator safety are given to attention in the machine design.

PLC Parameters on Touch Screen. This provides a state-of-the-art Control System. Following functions will be performed by PLC system: Start – Stop – Jog & Speed Controls of Turret. Start – Stop – Speed Controls of Feeder. Guards By pass control Time Selectable – Min/Sec. RPM and Counter. Output Voltage and Frequency with Fault History. Recipes and Batch data Management Production Alarm Identification. Alarm History Management Component Replacement History Management Report Generation Module for detailed Batch data, Recipe, Alarm History and Component Replacement History. RS 232 Serial. Advantages---------- Standardize Operational Procedure Increase in Productivity, efficiency & reduce product loss. Precise Quality Control of the Process. Temper Proof data & User-friendly. Less Batch Setup Time & Minimize Maintenance Cost. Improve Quality of Products.

Technical Specifications

MODEL ‘B’ ,’BB’ & ‘D’ TOOLING ‘D’ TOOLING ‘B’ TOOLING
No. Of Station 4+4+4=12 8 10
Tooling 4B/4BB/4D TOOLING ‘D’ TOOLING ‘B’ TOOLING
Max. Operating Load (Tons) 60 kN / 6 Tons 60 kN / 6 Tons 60 kN / 6 Tons
Pre Compression Load (Tons) 20 kN / 2 Ton 20 kN / 2 Ton 20 kN / 2 Ton
Turret Speed (rpm) 5 to 38 5 to 38 5 to 38
Force Feeder RPM 12 to 75 12 to 75 12 to 75
Output Tablets/ Hour Min. 1200 2400 3000
Output Tablets/ Hour Max. 9000 18200 22800
Max. Tablets Dia. (mm) 19 For “D” Tooling 
16 For “B” Tooling 
11 For “BB” Tooling
19 16
Max. Depth Of Fill (mm) 20 20 17
Hopper Capacity 3 Kg. 3 Kg. 3 Kg.
Upper Punch Penetration (mm) 2 to 6 mm 2 to 6 mm 2 to 6 mm
Main Electric Motor (Driven through ACVF) 2 HP, 3 Phase 2 HP, 3 Phase 2 HP, 3 Phase
Gear Motor for Feeder (Driven through ACVF) 0.25 HP, 1/3 Phase 0.25 HP, 1/3 Phase 0.25 HP, 1/3 Phase
Electric Supply Single Phase or 3 Phase Single Phase or 3 Phase Single Phase or 3 Phase

Packing Specification

Net Weight (kg.) 415 kg
Gross Weight (kg.) 487 kg
Case Size [Outer] L x W x H 914 mm [36”] x 1016 mm [40”] x 1397 mm [55”]
Machine Dimensions L x W x H (mm) 813 x 584 x 1266

Lab Press with Mighty Features: • The speed of the turret is adjustable through ACVF variable drive. • Excellent accessibility for quick cleaning and product conversion. • Center pillar Drive Mechanism with powerful Gear Box. • Design ensuring the highest standard of cGMP. • Turret Electrode less Nichol Plated (ENLP). • Hard heat-treated Presser Rollers. • Low noise level. • Easy movability. • Electrical voltage & frequency can be provided as per customers requirements.

Technical Specifications

TYPE DETAILS
No Of Station 1 st/ 3 st/ 6 st/ 8 st/10st. 12 st.

Multi Tooling

12 st – (4+4+4 / 6+6)

Tooling ‘D & B & BB ‘B&BB ’ D,B and BB / D & B
Tab. Dia Max. 23/16 /11 MM 16 /11MM 23/16/11 MM
Tab. Out put Max./Hr. 5760 / 11520 / 5360/19500 23040 23040 max.
Depth Of Fill 20 / 17 MM 17 MM 20 MM
Comp. Pressure 6 Tons 6 Tons 6 Tons
Turret Speed 5 RPM min / 32 RPM max.