The Mixing movement of the product in the mixer is deflected and interfered by three mixing rods made of stainless steel. The cube Mixer is a based on a movement, which through its tumbling effect produces in the shortest possible time a homogeneous mixture.

The product to be mixed is treated very gently. The cube Mixer can be attached to the universal gearing. The housing is manufactured from stainless steel. This Attachment is Suitable to Attached in our Both Main Drive.

Double Cone Mixer operates on free flow principle. This unit is used for rapid mixing of all types of free flowing powders and granules. The uniform, multidimensional arrangement of the mixer walls ensures good mixing.

The vessel is manufactured from stainless steel and secured with threaded knobs. This unit can be attached to the Universal Gearing.

The Lab Mass Mixer having horizontal half round bowl open on the upper side with acrylic cover and specially designed mixing blade. The Main Mixing Blade is rotated to circulate the material to be mixed. The half-round bowl and mixing blade made out of stainless steel having a bowl capacity of 5 kg. And operational capacity of 3.5 kg. [approx]. Within a few minutes, it can be empty by tilting

The power mixer is suitable for our all Main Drive.

This apparatus is used for molding suppositories, lipsticks and similar products. This equipment permits melting, agitation and mixing during operation. Stainless steel kettle and agitator are thermostatically heated with 1000 watt heating element. Thermostat permits adjustment of temperature of kettle 80-90 degree C. The stand, below the filler nozzle, holds any type of mould. It is adjustable in all directions and controlled by a hand wheel. Production varies with material, moulds, etc. Stirring, mixing and melting are achieved in a single operation and are not interrupted during the filling process. The pot for filling and molding suppositories and lipsticks are suitable for attach on our Main Drive. 

Optional– The mould as per the requirement of customer can be designed at extra cost.

The ‘Y’ Blender is mainly used for mixing of dry power and its provides excellent results when mixing two different powers. This mixer provides a unique movement to the powers and thus mixes them very well. It is suitable to processing different kind of materials of pharmaceuticals, chemicals, foods, cosmetics etc. This Attachment is Suitable to Attached in our all Main Drive.

Triple Roller Mill – STRM is used in the preparation of ointments, salves, dough and similar products. The hourly production is from 2 Kgs. To 12 kgs. depending upon the constituency of the material. Three hard stainless still rollers, which is 110 mm long, and 50 mm diameter produce the Rolling action.

Two outer rollers are spring supported to eliminate the possibility of damage to the rollers or to the operating mechanism. The space between the rollers is adjustable by turning one thumbscrew.

This Ball Mill is a very sturdy attachment and mainly used for grinding crystalline materials and for the mixing of dry materials. The Ball Mill consists of the transmission drive, stand of the Ball Mill and the Ball Mill it self. The jar is stainless steel and contains balls, which vary in diameter for 30 to 40 mm.

The jar rests on two spindles. One of which is driven spindle. The jar and balls can be sterilized in a water bath. This Attachment is Suitable to Attached in our Both Main Drive.

A silent feature of Dosing Filling for Ointment SDFO attachment is an easy adjustment, quick removal of the pump and Charging Hopper for cleaning. The Machine is suitable to fill drip free and accurately, ointments, creams, pharmaceuticals and cosmetic emulsion, toothpaste, oil paints, jam, ketchup, and similar products into tubes, jars, bottles, plastic containers etc., the capacity of this attachment between 1000 and 1200 fills per hour.

Standard dosing ranges from 10 to 200 ML. filling nozzles with 2, 4, & 8 mm I.D are delivered with the unit. The hopper has a capacity of 18 litres, and all parts in the contact with the material to be filled are made of stainless steel. This Attachment is Suitable to Attach in our Both Main Drive.

This machine is equipped with an oscillating rotor suitable to manufacturer wet granulates of various granule sizes. Sieves are easily exchangeable. Rotor, sieve and all parts coming in to contact with the material are constructed of stainless steel. Each apparatus is supplied with one sieve. The following mesh sizes are available for the wet granulator on request. 6 MESH TO 50 MESH.

The capacity of the machine depends of the material and the mesh sizes of the sieve and is maximum 20-25 kg per hour. This Attachment is Suitable to Attached in our All Main Drive.

An ideal to granulate tablets, slugs and pellets. The Dry Granulator – SDG consists of two motor-driven rollers with teeth force. This forces the material to be granulated with a very low proportion of powder. Hard slugs of 2 to 2.5 mm thick the following granulation will be obtained, 50% of 16 mesh, 25% of 24 mesh, 10% of 70 mesh and 20% of the powder.

This is a very sturdy attachment and can be run continuously for granulating tablets/slugs and pellets & Suitable to Attached in our Both Main Drive.

Vibro Sieve Shaker designed and operates on the principle of gyratory motion. The vibration can be adjusted by changing the speed. Vibro Sieve Shaker is a circulatory screening attachment widely used for sieving, grading, sizing, screening of a range of solids from Pharmaceuticals, Food, Chemical, Dye, Cosmetic, and Plastic Powder Granules & Particles. Screening. Vibro Sieve Shaker allows for superior and fast separation of particles.

Other sieves are available on request at extra cost
AVAILABLE SS SIEVES SIZES – 5 MESH TO 200 MESH [A.S.T.M]

Silent features of Dosing Filling for Liquids SDFL machine are accurate dosing, drip free filling, fast disassembly of the pump and valves for easy cleaning. The Dosing Filler fills and dispenses all liquids with two pumps and valves made from stainless steel. It can be adjustable by 10 to 150 ml. If filling quantities of 300 ML Maximum are required, both pumps work on one common filling needle. Filling Needles are made of stainless steel and can be supplied for any container to be filled.

The capacity of the Machine is between 1000 and 2000 fills per hour. Filling range of this attachment is 10 ML to 150 ML. And all material contact parts are made from stainless steel. This attachment can be attached to our both main Drive.

Our Drum Hoop mixer attachment is suitable for power and granule mixing. The Drum Hoop Mixer useful in research laboratory and also pharmaceutical, food, chemical and plastic fields having two parts

Main frame unit with Roller stand.

Acrylic Mixing Drum with Rotating Arrangement.

The Drum Hoop Mixer having drum capacity of 5 Kg. And operational capacity 2 to 3 kg.

The Coating pan is used to produce uniform coating on tablets with the help of Baffles inside of pan. This can be mounting on the universal gearing and as a result different tilting angle can be set up to 45 Degree.

It is also permits speed control at any desired RPM. The pan capacity is 9.5 Liters Approx. & Suitable to Attached in our Both Main Drive.

Pelletizer is the unit which is equipped with a tilting and locking device, which is easy to operate. This permits adjustment of the infinitely variable setting of the pan angle, over its whole range. For the cleaning of the sides as well as the bottom of the pan an adjustable scraper is provided. Parts coming in to contact with the material to be processed are made of polished stainless steel. The material to be processed is fed manually, or with a metering device if a continues is required. The tilted palletizing pan, which rotates in a clockwise direction, is tilted to our motor drive. The material is brought to practice the highest point of the pan and then rolls down in the even scrim, to the lower half of the pan.

Homogenizer unit is suitable for mixing of different types of liquids like oil in water & water in oil construction up to 30 kgs. / Hour. A piston pump produces homogenization. Materials can be filling to pump from a hopper, having a capacity of 1.5 litres.

By the forward & the backward movement of the piston Homogenization takes place. A vacuum is created during the backstroke of the piston, which sucks the liquid back. During the forward movement of the piston, the liquid is pushed against the tip of the nozzle.

This Unit is Suitable to Attach in our Both Main Drive.